New products
Isotherm
This Isotherm Smart Energy Control device, thanks to its sophisticated microprocessor, is able to significantly reduce the energy consumption of refrigerators and cooling units. It continuously...
Isotherm
Cold unit only BD 50 F Isotherm version 12/24V dimension 330x160x175 mm. Refrigerating unit with SECOP compressor with automatic electronic control that automatically turns off the unit when the...
Isotherm
Cold unit only BD 35 F Isotherm version 12/24V dimension 280x160x175 mm. Refrigerating unit with SECOP compressor with automatic electronic control that automatically turns off the unit when the...
Active filters
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version.Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version. Original Katadyn Pump
KATADYN
Feed pump kit for Katadyn watermaker in 12V version. Original Katadyn Pump
KATADYN
The best-selling manual watermaker in the world, rapid production of fresh water, ideal for isolated adventure applications or BOAT survival devices, discover the easy desalination of sea water...
KATADYN
This Survivor 06 manual watermaker is recommended for life rafts but also in the constitution of survival kits at sea thanks to its small size (127 x 203 x 64 mm) and its light weight (1.13 kg)....
KATADYN
The Diaphragm Replacement Kit contains the parts needed to replace a diaphragm element on a PowerSurvivor-80E or the diaphragm for the Survivor 35 or PowerSurvivor 40E. It also includes seals and...
KATADYN
Relief valve kit for PowerSurvivor 40E. Replacement pressure relief valve with base for your Katadyn PowerSurvivor 40E. This kit includes: pressure relief valve, socket, 2 o-rings, 2 screws,...
KATADYN
This 5 micron pre-filter for the PowerSurvivor 40E, 80E and 160E further protects the reverse osmosis membrane from excessive exposure to particles smaller than 30 microns. This kit contains: 2 x 5...
KATADYN
Repair kit for the Katadyn PowerSurvivor 40E. The seals must be replaced after approx. 1000 hours of operation, in the event of age-related damage or heavily worn seals. Eccentric gear lubricant is...
KATADYN
KATADYN PowerSurvivor 40 of 12 V. The simplest watermaker to install on a pleasure boat and the most energy efficient, KATADYN Survivor 40 with consumption of 4 A/h with a production of 5.6 liters...
